ConfOrganizer 

  Abstract |    References | 

---

Paper References

• . Saadatmanesh, H., & Ehsani, M. R. (1991). RC beams strengthened with GFRP plates. I: Experimental study. Journal of structural engineering, 117(11), 3417-343.
• JSCE. )2001(. “Recommendations for upgrading of concrete structures with use of continuous fiber sheets.” JSCE Concrete Engineering Series, 41, 31–34.
• fib. )2001(. “Externally bonded FRP reinforcement for RC structures.” Bulletin 14, 51–58.
• American Concrete Institute )ACI(. )2002(. “Guide for the design and construction of externally bonded FRP systems for strengthening concretestructures.” SCI 440.2R-02, ACI Committee 440.
• Wu, Z. S., & Niu, H. D. (2000). Study on debonding failure load of RC beams strengthened with FRP sheets. Journal of Structural Engineering, 46(3), 1431-1441.
• WU, Z., & NIU, H. (2007). Prediction of crack-induced debonding failure in R/C structures flexurally strengthened with externally bonded FRP composites. Doboku Gakkai Ronbunshuu E, 63(4), 620-639.
• ACI 440.2R-17, Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, Reported by ACI Committee 440.2017 (2017).
• CNR-DT 200 R1/2013, Guide for the design and construction of externally bonded FRP systems for strengthening existing structures, Rome, Italy: National Research Council, 2013.
• Lu XZ, Teng JG, Ye LP, Jiang JJ (2007) Intermediate crack debonding in FRP-strengthened RC beams: FE analysis and strength model. Journal of Composites for Construction, 11(2):161-174.
• Teng JG, Smith ST, Yao J, Chen JF (2003) Intermediate crack-induced debonding in RC beams and slabs. Construction and building materials, 17(6-7):447-462.
• Sabzi, J., & Esfahani, M. R. (2018). Flexural behavior of RC beams strengthened by CFRP sheets in the beams with low and high reinforcement ratios, Amirkabir Journal of Civil Engineering, 50(5):907-918.
• Sabzi, J., & Esfahani, M. R. (2018). Effects of tensile steel bars arrangement on concrete cover separation of RC beams strengthened by CFRP sheets. Construction and Building Materials, 162, 470-479.
• Esfahani, M. R., Kianoush, M. R., & Tajari, A. R. (2007). Flexural behaviour of reinforced concrete beams strengthened by CFRP sheets. Engineering structures, 29(10), 2428-2444.
• Mostofinejad, D., & Moghaddas, A. (2014). Bond efficiency of EBR and EBROG methods in different flexural failure mechanisms of FRP strengthened RC beams. Construction and Building Materials, 54, 605-614.
• Mostofinejad, D., & Khozaei, K. (2015). Effect of GM patterns on ductility and debonding control of FRP sheets in RC strengthened beams. Construction and Building Materials, 93, 110-120.
• Maalej, M., & Leong, K. S. (2005). Effect of beam size and FRP thickness on interfacial shear stress concentration and failure mode of FRP-strengthened beams. Composites Science and Technology, 65(7-8), 1148-1158.
• Breña, S. F., & Macri, B. M. (2004). Effect of carbon-fiber-reinforced polymer laminate configuration on the behavior of strengthened reinforced concrete beams. Journal of composites for construction, 8(3), 229-240.
• Gao, B., Kim, J. K., & Leung, C. K. (2004). Experimental study on RC beams with FRP strips bonded with rubber modified resins. Composites science and technology, 64(16), 2557-2564.

  Abstract |    Highlights |    References | 

---

Paper Highlights

• بررسی رفتار مدل های بتن محصور در ستون های مسلح شده با میلگرد GFRP
• استفاده از مدل‌های بتن محصور ارائه شده برای محصوریت با خاموت فولادی نیز در مورد ستون های محصور با خاموت GFRP پاسخ دقیقی ارائه نمی کند
• باید تفاوت محصوریت ناشی از میلگرد GFRP با محصوریت ناشی از میلگرد فولادی در روابط مدل ماده بتن محصور، در نظر گرفته شود.

---

Paper References

• Samaan, M., A. Mirmiran, M. Shahawy, (1998) "Model of concrete confined by fiber composites," Journal of structural engineering,124 (9),1025-1031.
• Bisby, L., M. Green, V. Kodur, (2005) "Modeling the behavior of fiber reinforced polymer-confined concrete columns exposed to fire," Journal of Composites for Construction,9 (1),15-24.
• Aire, C., R. Gettu, J. Casas, S. Marques, D. Marques, (2010) "Concrete laterally confined with fibre-reinforced polymers (FRP): experimental study and theoretical model," Materiales de Construcción,60 (297),19-31

  Abstract |    References | 

---

Paper References

• 1. Dussek, I. J. (1980), “Strengthening of bridge beams and similar structures by means of epoxy-resin-bonded external reinforcement,” Transportation Research Record, (785).
• 2. Klaiber, W. F., Dunker, K. F., & Sanders, W. W. (1982), “Strengthening of single-span steel-beam bridges. Journal of the Structural Division,” 108(12), pp 2766-2780.
• 3. Saadatmanesh, H., & Ehsani, M. R. (1991), “RC beams strengthened with GFRP plates. I: Experimental study,” Journal of structural engineering, 117(11), pp 3417-3433.
• Teng, J. G., Chen, J. F., Smith, S. T., & Lam, L. (2002), “ FRP: strengthened RC structures,” Frontiers in Physics, 266.
• Seracino, R., Raizal Saifulnaz, M. R., & Oehlers, D. J. (2007), “Generic debonding resistance of EB and NSM plate-to-concrete joints,” Journal of Composites for Construction, 11(1), pp 62-70.
• Liu, I. S., Oehlers, D. J., & Seracino, R. (2006), “Tests on the ductility of reinforced concrete beams retrofitted with FRP and steel near-surface mounted plates,” Journal of Composites for Construction, 10(2), pp 106-114.
• Bonacci, J. F., & Maalej, M. (2001), “Behavioral trends of RC beams strengthened with externally bonded FRP,” Journal of Composites for Construction, 5(2), pp 102-113.
• Bizindavyi, L., & Neale, K. W. (1999), “ Transfer lengths and bond strengths for composites bonded to concrete,” Journal of composites for construction, 3(4), pp 153-160.
• Sabzi, J., and Esfahani, M.R., (2017) , “Flexural behavior of RC beams strengthened by CFRP sheets in the beams with low and high reinforcement ratios,” Amirkabir Journal of Civil Engineering: (in Persian).
• Sabzi, J., and Esfahani, M. R., (2018), “Effects of tensile steel bars arrangement on concrete cover separation of RC beams strengthened by CFRP sheets,” Construction and Building Materials, 162, pp 470-479.
• Ross, C. A., Jerome, D. M., Tedesco, J. W., and Hughes, M. L. (1999), “Strengthening of reinforced concrete beams with externally bonded composite laminates,” Structural Journal, 96(2), pp 212-220.
• Pimanmas, A., and Pornpongsaroj, P. (2004), “Peeling behaviour of reinforced concrete beams strengthened with CFRP plates under various end restraint conditions,” Magazine of Concrete Research, 56(2), pp 73-81.
• Esfahani, M. R., Kianoush, M. R., & Tajari, A. R. (2007), “Flexural behaviour of reinforced concrete beams strengthened by CFRP sheets,” Engineering structures, 29(10), pp 2428-2444.
• American Concrete Institute. Committee 440. (2002), “Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures,” ACI 440.2 R-02. American Concrete Institute.
• Isis Canada. (2001), “Strengthening Reinforced Concrete Structures with Externally-bonded Fibre Reinforced Polymers [computer File],” ISIS Canada.
• ACI Committee 318, (2014), “Building Code Requirements for Structural Concrete and Commentary,” American Concrete Institute, Farmington Hills.
• ABAQUS User’s Manual, Version 6.13.