Conf Organizer (CO)

Show

Author

Identity

Mr. Amin Hasheminasab

Associated Professor, Civil Engineering Department, Ferdowsi University of Mashhad, Mashhad, Iran

Civil Engineering

[email protected]

Articles by this author

مدل‌سازی عددی تیرهای فولادی تقویت‌شده با صفحات CFRP تحت بارگذاری خستگی

More than 3 years ago

Mr. Amin Hasheminasab , Associated Professor, Civil Engineering Department, Ferdowsi University of Mashhad, Mashhad, Iran ,
Dr. Mohammadreza Tavakkolizadeh , Professor, Civil Engineering Department, Ferdowsi University of Mashhad, Mashhad, Iran ,

Events:

Abstract | Highlights | References |

Paper References

1. Awad, Z. K.; Aravinthan, T.; Zhuge, Y. and Gonzalez, F. (2012),“ A review of optimization techniques used in the design of fibre composite structures for civil engineering applications,” Materials and Design, 33, pp 534–544.
2. Tavakkolizadeh, M. and Saadatmanesh, H. (2003),“Fatigue strength of steel girders strengthened with carbon fiber reinforced polymer patch,” Journal of Structural Engineering, 129 (2), pp 186-196.
3. Deng, J. and Lee, M. M. K. (2005),“Fatigue performance of metallic beam strengthened with a bonded CFRP plate,” Composite Structures, 78 (2), pp 222-231.
4. Colombi, P. and Fava, G. (2015),“ Experimental study on the fatigue behavior of cracked steel beams repaired with CFRP plates,” Engineering Fracture Mechanics, 145, pp 128-142.
5. Anderson, T. L. (1994),“Fracture Mechanics, Fundamentals and Applications”, 2nd Edition, CRC Press, Washington DC.
6. Hartloper, A. R.; De Castro e Sousa, A. and Lignos, D. G. (2021),“ Constitutive modeling of structural steels: nonlinear isotropic/kinematic hardening material model and its calibration,” Journal of Structural Engineering, 147 (4), 04021031.
7. Gorash, Y. and MacKenzie, D. (2017),“ On cyclic yield strength in definition of limits for characterization of fatigue and creep behavior,” Open Engineering, 7 (1), pp 126-140.
8. Hernandeza, D. A.; Alberto Soufen, C. and Ornaghi Orlandi, M. (2017),“ Carbon fiber reinforced polymer and epoxy adhesive tensile test failure analysis using scanning electron microscopy,” Materials Research, 20 (4), pp 951-961.
9. Ferreira Rodrigues, M.; Correia, J. A. F. O.; Pedrosa, B.; De Jesus, A. M. P. (2017),“ Static and fatigue behaviour of Sikadur®-30 and Sikadur®-52 structural resins/adhesives,” International Conference on Structural Integrity, Funchal, Madeira, Portugal.
10. Kachlakev, D. I.; Miller, T. H.; Potisuk, T.; Yim, S. C. and Chansawat, K. (2001),“ Finite element modeling of reinforced concrete structures strengthened with frp laminates,” Oregon Department of Transportation, 200 Hawthorne SE, Suite B-240, Salem and Federal Highway Administration, 400 Seventh Street SW, Washington DC.
11. Wang, Y. C.; Lee, M. G. and Chen, B. C. (2007),“ Experimental study of FRP-strengthened RC bridge girders subjected to fatigue loading,” Composite Structures, 81 (4), pp 491-498.
12. Karolczuka, A.; Papuga, J. and Palin-Luc, T. (2020),“ Progress in fatigue life calculation by implementing life-dependent material parameters in multiaxial fatigue criteria,” International Journal of Fatigue, 134, 105509.
13. Yang, Y.; Feng, W.; Xu, S.; Li, Y. and Zhang, R. (2021),“ Fatigue life analysis for 6061-T6 aluminum alloy based on surface roughness,” Plos One, 16 (6), 0252772.

ConfOrganizer

Articles by this author

Paper Abstract

Paper Highlights

Paper References